RNN-SM-C TYPE DOUBLE FACER

RNN-SM-C TYPE DOUBLE FACER

Specifications

  • ★Heating plate surface by grinding treatment，hot plate width600mm，a total of 16 pieces heating plate.

    Preheat board is made of contactor board,  in accordance with the national standrads of pressure container, enclosed the pressure container certificate and inspection certificate.

    ★Hot plate using the touch plate design structure. Plate movements using pneumatic spring-type structure.

    ★On both sides about conveyor belt deviation adjustment adopts automatic adjustment，2 sets of the conveyor belt tensioning system，one set is manual（fine tuning）、the other is pneumatic adjustment（high speed）。

    ★Thermal pipe heating plate temperature control points seven sections with temperature display.

    ★up cotton belt with double cylinder S cotton belt tensioning device。

    ★bottom cotton belt with s-shaped correction manually tensioning mechanism, structure simple and practical，under with manual fine-tuning.

    ★Drive roller coated with attached wear-resistant rubber ，showed a herringbone structure，With a high, ensure smooth cardboard output.

    ★Main drive motor for frequency conversion motor，low-speed torque，wide speed range ,reliable, and easy maintenance.

    ★hot plate internal for partition isolation structure,s-shaped flow of steam，Steam, water separation function significantly improves the utilization of steam。

  • 、temperature requirment：160—200℃   steam pressure：0.8-1.3Mpa          2、air source pressure：0.6—0.9Mpa

    3、Cooling stereotypes length：4m    Heating plate quantity：14 pieces       4、hydraulic system pressure：6—8Mpa

    ※roller diameter parameters：

    • up drive rubber roller diameter：￠700mm bottom drive rubber roller diameter： ￠400mm        Wear rubber Outsourcing

    2、Former follower with roller diameter：￠270mm          After setting belt driven roller diameter：￠186mm

    3、Pressure belt roller diameter：    ￠70mm          Shaping roller diameter：￠86mm

    4、The belt tension roller diameter：￠130mm        The roll diameter with detuning：￠124mm

    5、Under the belt tension roller diameter：￠130mm          Entrusted with the roll diameter under the belt：￠130mm

    Note: All the roller surface after grinding are hard chrome plated。

    ※Power motors and electrical parameters：

    • Main drive motor power：30KW 380V    50Hz     Continuous (S1) working standard

    2、Hydraulic station motor power ：2.2KW   380V  50Hz    Continuous (S1) working standard

  • Name of main parts

    Brands or place of origin

    Material and type

    Main skeleton

    Tiangang or laigang

    NO36Channel steel and NO16Beam

    Heating plate

    Tiangang or jigang

    Q235BContainer board production

    Main drive motor

    Hebei hengshui

    30KWfrequency motor

    Cotton belt

    Shenyang

    Thick cotton webbing10mm

    traps

    Beijing

    Inverted bucket

    contactor

    France Schneider

     

    Hydraulic station

    Hebei

     

    bearing

    HRB,ZWZ,LYC

     

    Drive wallboard

    Hebei

    Gray cast ironHT250

    Pneumatic elements

    Zhejiang sonorCSM

     

    Photoelectric switch

    Korea Autonics

     

    Seat belt bearing

    Zhejiang wuhuan

     

Yes Iam Intrested

For more information or to request a quote, please contact us.

Why Choose Our Double Facer?

    • Ensures strong bonding between liner and corrugated paper.
    • Consistent heating system for uniform adhesion.
    • Heavy-duty construction for long-lasting performance.
    • High-speed operation to match production demands.
    •  
Contact us.